|
| Test Stands |
|
Motorized test stands and Mechanical test stands from Chatillon, Hoto Instruments, Imada, Mark-10 and MECMESIN
|
Manual Test Stands | Motorized Test Stands
 |
Dillon CT Manual Test Stand
FREE UPS Ground Shipping
The Dillon CT Manual Test Stand is an affordable force testing tool to improve the quality of force measurement results. It controls the variables which can affect testing results and does both compression testing and tension testing. Capacity to 500 lbs with 0.12 inch travel per hand wheel rotation. |
- Capacity: 110 lbs |
Price: $280.50 |
 |
Mark10 ES10 and ES20 Manual Test Stands
Compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) for more precise testing with greater consistency in testing results. |
- Capacity: 100 lb |
from $470
FREE UPS Ground! |
 |
Mark 10 TSB100 Lever Operated Manual Test Stands
A perfect solution for quick-action pull testing and compression testing of up to 100 lb of tensile or compressive force. Loading lever can be positioned in 30° increments for ease of operation. Optional adjustable travel stops. |
- Capacity: 100 lb
- 6" travel without stops, 3.75" with stops
|
$755
FREE UPS Ground! |
 |
Imada LV-220 Vertical Manual Lever Test Stand
Standard compression and tension tests, operate with downward lever stroke, 5" max clearance (10" with optional extender), 4" stroke, 0.1% accuracy |
- 220 lb (100 kg) max load |
$675
Free UPS Ground! |
 |
Imada LH-220 Manual Lever Test Stand
Tensions and compression testing, lever action for rapid testing, large work area, 4" stroke, 0.1% accuracy, ideal for crimp testing and other applications where rapid sample loading is required |
- 220 lb (100 kg) max load |
from $695
Free UPS Ground! |
 |
Mark 10 TSA750 / TSA750H Lever Operated Manual Test Stands
The Mark 10 TSA750/TSA750H lever operated force measurement test stand is a perfect solution for quick-action pull testing and compression testing of up to 750 lb of tensile or compressive force. Modular design. |
- Capacity: 750 lb
- 6" travel
|
$849
FREE UPS Ground! |
 |
Imada SH-110 Horizontal Manual Wheel Operated Test Stand
Horizontal design is ideal for peel testing, hand wheel provides relatively consistent speed for repeatable tests, both compression and tension testing, 7.5" continuous stroke. Distance meter available |
- 110 lb max load
- 220 lb max load |
from $875
Free UPS Ground! |
 |
Imada HV-110 Vertical Manual Wheel Operated Test Stand
Hand wheel design, both tension and compression tests, optional distance meter, gauge remains in position when the wheel is released |
- 110 lb max load |
from $985.00
Free UPS Ground! |
 |
MECMESIN MDD Manual Direct Drive Test Stands
The MECMESIN MDD is a rigid, manually-operated hand wheel test stand, that allows the user to build up a cost effective solution to a variety of tension and compression applications. |
- Capacity: 220 lb |
from $911 |
 |
Mark10 ES30 Manual Test Stands
The Mark-10 ES30 Force Measurement Test Stand is a versatile and economical solution for most compression and tensile testing applications. Precision hand wheel operation enables the user to easily and accurately test up to 200 lb of force. |
- Capacity: 200 lb |
$1115
FREE UPS Ground! |
 |
MECMESIN LCP/S Manual Test Stand
The MECMESIN LCP/S high precision lever operated manual test stand has been designed to facilitate testing on a repetitive basis. Accuracy is achieved by adjusting the setting of the gauge and base plate to ensure perfect fixture alignment. With adjustable stops and fine adjustment thimble.44 lbs capacity. |
- Capacity: 44 lbs |
from $1119 |
 |
Mark 10 TSC1000 / TSC1000H Handwheel Operated Manual Test Stands
The Mark 10 TSC1000/TSC1000H hand wheel operated force measurement test stand is ruggedly built for pull testing and compression testing of up to 1000 lb. A large hand wheel requires little effort, even at high loads. Compatible with all Mark-10 force gauges and grips. |
- Capacity: 1000 lb
- 3.5 " travel
|
$1306
FREE UPS Ground! |
 |
SV-05S Micro Movement Vertical Test Stand with Distance Meter
Both compression (push) and tension (pull) tests, 2.75" travel per knob rotation, reduced backlash and fine movement for highly precise measurements, reads in both inches and millimeters, 0.1% accuracy of reading |
- 4.4 lb (2 kg) max load |
$1250
Free UPS Ground! |
 |
Mark 10 TSF / TSFH Handwheel Operated Manual Test Stands
Features a convenient side-mounted hand wheel and modular design with a rigid 3" x 3" column. With a removable steel loading surface with threaded holes for fixture and grip mounting. Available in vertical or horizontal configurations.Ideal for spring testing, destructive testing, product integrity testing and more. |
- Capacity: 1000 lb
- 4" travel
|
$1805
FREE UPS Ground! |
 |
Imada HV-300 & HV-500 Manual Wheel Operated Test Stand
Hand wheel design, both tension and compression tests, 15" max clearance, gauge remains in place when hand wheel is released, ideal for oversized materials |
- 300 lb max load
- 500 lb max load |
from $2250.00
Free UPS Ground! |
 |
Asker CL-150 Durometer Constant Load Test Stand from Hoto Instruments
The Asker CL150 Constant Load Durometer Operating Stand from Hoto Instruments features a unique pneumatic dampening mechanism that provides for improved repeatability and reliability in durometer testing. Works with Asker high performance X or Super EX durometers to control pressure in a consistent, repeatable manner. |
- Works with Super EX and X High Performance durometers
|
$2535.00 |
 |
Chatillon MT-150 Modular Manual Test Stand
For tensile and compression testing. Can be equipped with a quick-action lever or precision handwheel for controlling crosshead speed and travel. Can be bench mounted, wall mounted or positioned horizontally. 6" standard stroke, 29", 30" or 60" vertical clearances available |
- 150 lb capacity |
From: $957.71 |
 |
Chatillon MT Manual Test Stand
For tensile and compression testing. Can be equipped with a quick action lever or precision hand wheel for controlling crosshead speed and travel. Can be bench mounted, wall mounted or positioned horizontally. Vertical clearances available from 20" to 60". Modular, single column design. |
- 150 lb capacity (660 N)
- 500 lb capacity (2.2 Kn) |
Call for prices |
 |
Imada MV-110 Motorized Vertical Test Stand
Both tension and compression tests, 9" max clearance (14" with optional extender), screw feeder for smooth, positive movement, no programming required, available in standard, low or high speed, optional distance meter |
- 110 lb max load |
$2385
Free UPS Ground! |
 |
Mark 10 ESM Motorized Test Stand
Versatile and precise test stand for compression & tensile force testing with modular design. Adjustable speed with a remote control unit. With a manual fine adjustment knob and stepper motor.
|
- Capacity: 200 lb
- 13" max travel
- Speed Range - 0.5-13 in/min [13-330 mm/min]
- Speed accuracy - ±5% of setting, ±0% variation with load |
$2375
FREE UPS Ground! |
 |
Chatillon LTCM-100 Digital Motorized Test Stands
Can be used for tensile, compression, peel and flexural testing when combined with a Chatillon DFE series force gauge. 5" throat and large work area. Crosshead travel in-min or mm-min selectable. 15" crosshead travel. 0.2 to 20 in/min crosshead speed. +/-3% accuracy at full capacity |
- 110 lb capacity (500 N) |
from $3227.66
Save when you bundle with a DFE or E-DFE gauge! |
 |
Dillon GTS-1000 Digital Test Stand
FREE UPS Ground Shipping
The Dillon GTS-1000 is a ball-screw driven digital test stand with impressive abilities. The dimensions, speed range and capacity have been carefully optimized to cover the test procedures and specimen sizes most often needed by quality departments within R&D and production industry. Capacity to 220 lb with multiple throat opening sizes. |
- Capacity: 220 lbs |
Price: $2380.00 |
 |
MECMESIN MultiTest 1 Motorized Test Stand
The MECMESIN MultiTest 1 is a 220 lbs capacity potentiometer-controlled test stand for tensile or compressive testing. This motorized test stand provides, in combination with a digital force gauge and gripping fixtures, a powerful yet affordable solution to your compression / tension testing requirements. |
- Capacity: 220 lbs |
$2655 |
 |
Mark 10 TSFM500 / TSFM500H Motorized Test Stands
Available in vertical or horizonal (H) confiuration. Remote control operation with removable base. Ideal for compression & tension tesing of springs, fabrics, metals, packaging and more. |
- Capacity: 500 lb
- 4" travel
- Speed Range - 0.2-5.5 in/min [5-140 mm/min]
- Speed accuracy - ±5% of setting, ±0% variation with load |
$2802.50
FREE UPS Ground! |
 |
Imada MX-110 Motorized Vertical Test Stand
Both tension and compression tests, 9" max clearance, jog, single cycle, force control, continuous cycle, wide speed range of 0.4 - 11.5 in/min, combo screw system and brushless motor for smooth and powerful operation. |
- 110 lb max load |
$2950.00
Free UPS Ground! |
 |
Imada MH-220 Motorized Horizontal Test Stand
Available in standard, high or low speed, 16" stroke, Available in either basic or auto cycle versions, optional dynamic and static distance meter |
- 220 lb max load |
from $3200
Free UPS Ground! |
 |
Mark 10 TSTM / TSTMH Motorized Test Stands
Motorized test stands are available in vertical or horizonal (H) confiuration. Ideal for closure torque testing, fastener torque testing and more up to 100 lb capacity. Motorized clockwaise and counterclockwise rotation. |
- Capacity: 100 lb
- 4" travel
- Speed Range - 0.3 -8.6 rpm (4-52°/sec)
- Speed accuracy - ±5% of setting |
$3229
FREE UPS Ground! |
 |
MECMESIN MultiTest 2.5 Motorized Test Stand
The MultiTest 550 lbs capacity potentiometer-controlled single-column test frame for compressive or tensile testing. It provides, in combination with a digital force gauge and gripping fixtures, a powerful yet affordable solution to your compression / tension testing application. |
- Capacity: 550 lbs |
$3240 |
 |
Imada MV-275 Motorized Vertical Test Stand
Both tension and compression tests, 16" stroke, auto cycle feature, optional dynamic and static distance meter, available in standard, low and high speeds, dual speed mode, quick return and emergency stop |
- 275 lb max load |
from $3400
Free UPS Ground! |
 |
MECMESIN MWD Manual Twin Column Test Stand
The MECMESIN MWD manual test stand is rated to 2200 lbs working capacity in both tension and compression. Hand wheel operation with max 150 mm crosshead travel. Optional loadcell mounting block available. |
- Capacity: 2200 lbs |
from $3688 |
 |
Chatillon TT Pneumatic Test Stand
Pneumatically-operated instrument for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for areas where intrinsic safety is required. Either tensile or compression testing where rapid test speed is required. 6" test stroke, hydro-check valve adjustment for controlling ram speeds as low as 0.1"/min. |
- 500 lb capacity (2.5 kN) |
from $5608.71 |
 |
Chatillon LTCM-500 Digital Motorized Test Stand
The Chatillon LTCM-500 test stand may be used for tensile, compression, peel, and flexural testing and is an economical, motorized test stand ideal for production environments, research & development laboratories and quality functions. Large 550 pound capacity, 5" throat, 29 inch crosshead travel
and the speed range is 0.2 to 20 inches/min |
- 550 lb capacity (2500 N) |
Call 1-800-832-0055 for Lowest Prices! |
 |
Chatillon TCD-200 Digital Motorized Test Stands
The standard RS232 permits peripheral control of all keypad functions of your digital gauges. Both force and deflection data may be transmitted or requested through the test stand interface. Analog outputs are also provided for graphing. Program test speed, high/low setpoints, cycling and more. Two 1/2" high LCD's display the speed and deflection values
Vertical travel distance 18" x 0.001", 2-1/4" horizontal clearance. Available in slow, med slow, med high and high speed. Accuracy: ±5% of max speed
|
- 200 lb capacity (1000 N) |
from $5225 |
 |
Imada MV-500 and MV-1100 Motorized Vertical Test Stand
Both tension and compression tests, 16" stroke, fixed or adjustable test speed mode, auto cycle, optional dynamic and static distance meter, available in standard, high or low speed |
- 500 lb max load
- 1100 lb max load |
from $4150
Free UPS Ground! |
 |
Imada MX-500 Motorized Vertical Test Stand
Both tension and compression tests, 13" stroke, jog, single cycle, continuous cycle, force control, wide speed range of 0.2 - 7 in/min, combo screw system and brushless motor for smooth and powerful operation. |
- 500 lb max load |
$4250.00
Free UPS Ground! |
 |
MECMESIN MultiTest-x Series Console Controlled Motorized Test Stands
The MECMESIN MultiTest-x series console controlled motorized test stands are full featured stands that can be fitted with integral loadcells from 2 N to the stand's capacity. Stores up to 5 test procedures and calculations. With RS-232 interface for data upload to PC. Control run to load/displacement/time/break, cycling between loads/displacements, loadholding, dynamic zeroing and more. |
Maximum Capacity:
- 220 lbs
- 550 lbs
- 1100 lbs |
from $7195 |
 |
Chatillon TCD-500 Digital Motorized Test Stands
RS232 supports data exchange and remote control using a PC. features a ball screw drive with dual column alignment for precise linear motion. Dynamic braking provides positive control of the motor. Programming of test speed, high and low deflection setpoints and cycling are performed using the membrane-style keypad. Two LCD displays indicate speed and deflection values. Accuracy +/- 5% full scale. 29.5" travel.
|
- 550 lb capacity (2500 N) |
from $8545.25 |
 |
MECMESIN MultiTest 1-i and 2.5-i Computer Controlled Motorized Test Stands
The MECMESIN MultiTest 1-i and MultiTest 2.5-i computer controlled motorized test stands are full featured stands with 220 or 550 lb capacity. The test stand can be fitted with integral loadcells from 2 N to the stand's capacity. With RS-232 interface for data upload to PC and included Emperor software for system setup, operation and sophisticated data analysis.
|
Maximum Capacity:
- 220 lbs
- 550 lbs |
from $9475 |
|
MECMESIN MultiTest 5-i Computer Controlled Motorized Test Stands
The MECMESIN MultiTest 5-i computer controlled motorized test stands are full featured stands with 1100 lb capacity. The test stand can be fitted with integral loadcells from 0.5 to 1100 lbs. With RS-232 interface for data upload to PC and included Emperor software for system setup, operation and sophisticated data analysis. |
Maximum Capacity: 1100 lbs |
price: $11,950 |
 |
MECMESIN Twin Column MultiTest Computer Controlled Motorized Test Stands (10-i & 25-i)
The MECMESIN MultiTest 10-i and 25-i twin column computer controlled motorized test stands are full featured stands with 2200 or 5500 lb capacity. The test stand can be fitted with integral loadcells from 0.5 to 5500 lbs. With RS-232 interface for data upload to PC and included Emperor software for system setup, operation and sophisticated data analysis.
|
Maximum Capacity:
- 2200 lbs
- 5500 lbs |
from $16,500 |
|
|
