|
This slender grip is ideal for testing small and hard-to-reach parts, such as electronic mechanical components. Use this grip with a force gauge and test stand to create a complete testing system.
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
B |
C |
D |
| 30 / 150 |
0.05 / 0.02 |
0.5 / 12.7 |
1.7 / 43.2 |
0.5 / 12.7 |
0-0.07 / 0-1.8 |
|
|
These ergonomic padded attachments are designed for testing muscle strength and other job task requirements. They attach directly to Mark-10 force gauges
|
|
This unique grip is designed for securing bottles, containers, and other items for closure torque testing. Eight rubber edged gripping arms effectively grip a wide range of sample shapes and sizes and can be individually positioned at angles of up to 180°. The G1023 mounts directly to the Mark-10 TST, TSTH, TSTM, and TSTMH Torque Measurement Test Stands. The grip may also be mounted to a force measurement stand to secure closures in such applications as top load testing.
100 / 11.3 |
1.5 / 0.7 |
4.8 / 122.0 max |
|
|
This grip effectively secures bottle caps during torque testing. The G1053 is designed with a hex tail to fit into the chucks of our torque sensors. Reversible serrated jaws accommodate caps with diameters of 0.65 - 1.80 in [16.5 - 45.7 mm] while a knob quickly engages and disengages samples.
This grip can be used either manually with an STJ torque sensor or MGT torque gauge (see application photo at left), or in test stand controlled applications, using our Series TST torque test stands. If used with a test stand, this grip complements our G1023 bottle grip.
| Capacity (lb-in / N-m) |
Weight (lb / kg) |
A |
B |
C |
D1* |
D2* |
100 / 11.3 |
0.39 / 0.18 |
3.1 / 78.7 |
2.0 / 50.8 |
1.6 / 40.6 |
1.16-1.8 / 29.5-45.7 |
0.65-1.29 / 16.5-32.8 |
* Jaws must be reversed to switch from ØD1 to ØD2
|
|
These grips are designed for gripping samples during torque testing, for use with TST, TSTH, TSTM, and TSTMH Torque Measurement Test Stands. Available in three chuck capacities. Includes key.
| Model |
Capacity (lb-in / N-m) |
Weight (lb / kg) |
B |
C |
| G1022-1 |
100 / 11.3 |
0.5 / 0.23 |
0.188 / 4.7 |
0.028-0.25 / 0.7-6.3 |
| G1022-2 |
0.062-0.375 / 1.6-9.5 |
| G1022-3 |
0.078-0.5 / 2-12.7 |
|
|
These aluminum compression plates are ideal for testing springs, foams, and other materials. The plates attach directly to Mark-10 force gauges and test stands.
| Model |
Capacity (lb / N) |
Weight (lb / kg) |
A |
G1009 |
200 / 1000 |
0.08 / 0.04 |
2.0 / 51.0 |
G1009-1 |
500 / 2500 |
0.27 / 0.12 |
3.0 / 76.2 |
|
|
