 |
Imada Data Acquisition Software
Full SPC and graphing capabilities to automate your data collection. Requires Imada gauge with RS232 serial port, CB-203 cable and any Pentium or equivalent with 32MB RAM or better. Requires Windows 3.11 or later and MS Excel 5.0 or later |
Requires
force gauge with RS-232 serial port, CB-203 cable and any
Pentium or equivalent with 32MB RAM or better, Windows 3.11 or later and Excel 5.0 or later. |
$199 |
 |
Mark 10 WinWedge Software - Transfers data to any Windows program and provides full two-way I/O for data collection and instrument control. Collects real-time data on multiple serial ports simultaneously with powerful DDE support in Windows. Easy to set up and use. No programming required |
Compatible with Mark-10 BG, BGI, CG, EG gauges (when equipped with outputs option)
|
from $251 |
 |
Chatillon NEXYGEN DF Series Software
(replaces NexyGen Gauge)
Easy-to-use Windows® based package interfaces directly to your digital force gauge. Download peak load results from the gauge and display your results in tabular and graphical formats. Chatillon NexyGen DF software provides basic force measurement tensile and compression test formats including pull to break, pull to limit, compress to rupture and compress to limit. The software also provides torque to break and torque to limit analysis when connected to a Chatillon torque gauge |
Requires Pentium II processor, 128 MB RAM, 250 MB disk space, CD-ROM for installation |
$318.24 |
 |
Imada ZP Recorder Software
Imada ZP Recorder data analysis software lets you process 1000 data per second -- not just the peak. Zoom in to examine important details, export data and more. Imada ZP recorder force analysis software does it all. |
Requires Pentium II 400MHz or equivalent with USB port, Microsoft Windows NT, 2000, XP and Imada Force Gauge models ZP, ZPH and ZPS |
$360 |
 |
Mark 10 MesurGauge Software - Force Testing Software: Mark 10 MesurGauge data collection software transfers data from your force gauge to any Windows product. Any force or torque gauge with RS-232 data output is compatible with Mark-10 MESURgauge software. Built-in simulated data allows the customer to evaluate the program with data which can be graphed, analyzed, and manipulated just like real test data. A gauge and cable are not necessary |
Requires Windows 2000 or later operating system, at least 150 MB of free hard disk space
and minimum display resolution of 1024 x 768 |
$470.25 |
|
Chatillon NEXYGEN TCD Series Software
(replaces NexyGen FM)
Easy to use force measurement testing software package designed to integrate directly with Chatillon TCD Series force testers and the Chatillon LF PLUS Series material tester. Is intuitive and allows the user to collect and analyze load and extension data from a common set of pre-configured test setups including pull to break, pull to limit, pull with yields, compress to rupture, compress to limit, compress with yields and cycling |
Requires Pentium II processor, 128 MB RAM, 250 MB disk space, CD-ROM for installation |
$850.25 |
|
Chatillon NEXYGEN MT Software
Provides a virtual testing laboratory. The software offers a full compliment of testing categories with multiple test types within each category complying with industry and international testing standards. Presents test results in tabular and graphical formats. With enhanced security features and audit trail management facilities for applications requiring compliance with regulatory standards such as 21 CFR Part 11 |
Requires Pentium II processor, 128 MB RAM, 250 MB disk space, CD-ROM for installation |
$1995 |
|
NEXYGEN FM Software
Helps you collect and analyze your force load results and extension data for a common set of pre-configured test setups. Easy to set up and use. Seamless OLE2 integration with Word, Excel, Access, PowerPoint and Outlook Microsoft products. You can easily create detailed and comprehensive reports using common, familiar software packages |
for use only with the Chatillon LF Plus Test Stand |
$300 |
|
ONDIO and ONDIO Suite
Lets you customize and expand your NEXYGEN MT applications. If you want to modify your NEXYGEN test setup to perform additional functions not part of the standard setup, the ONDIO application builder software is the answer. ONDIO software is based upon the VBScript programming language. ONDIO software presents detailed attributes for your standard NEXYGEN MT package. It presents configurable parameters in three steps: Test Parameters, Primary Script and Secondary Script: |
Requires Pentium II processor, 128 MB RAM, 250 MB disk space, CD-ROM for installation |
from $1100 |
