- Quality force testing and torque testing products and materials testing equipment
Contact UsYour AccountYour CartHome
Force Gauges
Torque Testing
Test Stands
Grips & Accessories
Hoto Instruments
Lafayette Instruments
Show Cart
Contact Us
Dillon FI-90 Indicators

Dillon FI90 indicators

Dillon FI-90 Indicators
Price: $1310

Shipping Weight: 14 lbs
currently in stock
estimate shipping cost

Includes ABS plastic enclosure, front-panel
setup and calibration, 7-segment LCD display
with 0.5" digits, pushbutton selectable
units of measure (lbs, kg, n), pushbutton zero,
peak hold, auto zero tracking, center
of zero, RS232 20mA output and battery
backup. Includes 8' power cord.

The Dillon FI-90 is a compact affordable force indicator designed to fit all Dillon loadcells and tensiometers and standard analog measuring devices.

  • Front-panel configuration - Make easy configuration choices without opening the unit and hunting for the right dip switch. Calibrate and adjust linearity from the front panel.
  • Convenient size - Approximately 2-7/8 inches high, 8-1/3 inches wide and 9 inches deep, the FI-90 Force Indicator fits easily on any table top or mounts on a vertical surface using the optional panel-mount kit.
  • Gross / peak key - Switches instantly between gross and peak-hold modes. Peak-hold mode saves and displays the highest displayed reading.
  • Three units of measure - User selects pounds, kilograms or newtons with a touch of the UNITS key.
  • Battery backup - Information is stored and saved in memory in case of power failure.


  • Selectable AC or 6-volt battery operation - Includes internal sealed lead-acid rechargeable battery, internal charger, low-battery indication, on/off (AC) switch and programmable automatic shutdown.
    • Battery operation - Includes four internal D-cell alkaline batteries, low battery indication, on/off switch, and programmable automatic sleep mode. (Does not come with AC power.)
    • Twelve-volt DC operation - DC power operation using a 12-volt external source 230 VAC operation.
  • RS-232 / 20 mA serial output - Transmit data on request, continuously, or use the peak-hold auto print function.
  • Setpoints - Two front-panel programmable setpoints with one user-defined remote key input. Interfaces with remote relay box.
  • Analog output - Dip-switch selectable. Isolated analog output: 1-5, 4-20, 10-50 mA. 0-5, 0-10 VDC (On AC models only)
  • Junction box - For summing up to four loadcells


  • Enclosure: Impact-resistant, ABS plastic; RFI coating 2.875" high x 8.36" wide x 9.11" deep (7.3 cm x 21.1 cm x 23.1 cm)
  • Display: 7-segment LCD; 6-1/2 digits plus sign, .5" (1.3 cm) high; moveable decimal
  • Annunciators: Center-of-zero, gross, peak, lb, kg, newtons, and battery
  • Analog to digital conversion rate: 60 times per second
  • Peak detection rate: 60 times per second
  • Display update rate: 2 times per second
  • Resolution: Up to 10,000 divisions, standard
  • Increments: 1, 2, 5, 10, 20, 50 or any sub multiple to .0001
  • Capacity: Front-panel configurable for values from 1 to 400,000 lb or 200,000 kg
  • Span range: .2 to 3.5 mV/V
  • Zero range: ±0.2 mV/V (zero information stored in memory)
  • Load cell excitation: 5 VDC, drives up to four 350-ohm load cells
  • Cable connection: Standard 7-pin
  • Power: 117 VAC +10 / -15%, 50/60 Hz, 5 watts max.
    Optional 230 VAC +10/-15%, 50/60 Hz, 5 watts max.
    Optional 12 VDC (10 - 14 VDC)
  • Battery operation: Internal 1.3AH rechargeable battery.
  • Continuous operation: one 350-ohm load cell, 32 hrs-four 350-ohm load cells, 15 hrs
  • Alkaline battery operation: Four internal D-cell alkaline batteries.
  • Continuous operation: one 350-ohm load cell, 200 hrs four 350-ohm load cells, 100 hrs
  • Operating temperature: 14° to 104° F (-10° to 40°C )
  • Warranty: Two years

Back to Main Dillon Page

Click here for Brochure
(Adobe PDF)

Get Adobe Acrobat Reader FREE


Home | Site Map | Shopping Cart | Store Policies | Your Account - an Itin Scale Company
4802 Glenwood Rd.
Brooklyn, NY  11234
Phone: (718) 336-5900
For orders phone 800-832-0055
FAX: (718) 627-1313

©2002-2016, All rights reserved
Email with comments or questions about this site