|
Rugged and reliable, these lower priced test
stands are suitable for a wide variety of products and materials.
Can be rigidly mounted to the work bench.
 |
Chatillon MT-150 Modular Manual Test Stand
For tensile and compression testing. Can be equipped with a quick-action lever or precision handwheel for controlling crosshead speed and travel. Can be bench mounted, wall mounted or positioned horizontally. 6" standard stroke, 29", 30" or 60" vertical clearances available |
- 150 lb capacity |
from $885.54
FREE Ground Shipping |
 |
Chatillon MT Manual Test Stand
For tensile and compression testing. Can be equipped with a quick action lever or precision hand wheel for controlling crosshead speed and travel. Can be bench mounted, wall mounted or positioned horizontally. Vertical clearances available from 20" to 60". Modular, single column design. |
- 150 lb capacity (660 N)
- 500 lb capacity (2.2 Kn) |
from $1092.50
FREE Ground Shipping |
Offers digital display of speed and deflection, full keypad
control and bi-directional RS232, allowing for remote computer
control. Can be programmed for speed, for high and low detection
set points, and for single or continuous cycling. When used
with DFIS or DFGS gauges,
stand will cycle between set points and gauge can also be
computer controlled.
 |
Chatillon TCD-200 Digital Motorized Test Stands
The standard RS232 permits peripheral control of all keypad functions of your digital gauges. Both force and deflection data may be transmitted or requested through the test stand interface. Analog outputs are also provided for graphing. Program test speed, high/low setpoints, cycling and more. Two 1/2" high LCD's display the speed and deflection values
Vertical travel distance 18" x 0.001", 2-1/4" horizontal clearance. Available in slow, med slow, med high and high speed. Accuracy: ±5% of max speed
|
- 200 lb capacity (1000 N) |
from $5225
FREE Ground Shipping |
 |
Chatillon TCD-500 Digital Motorized Test Stands
RS232 supports data exchange and remote control using a PC. features a ball screw drive with dual column alignment for precise linear motion. Dynamic braking provides positive control of the motor. Programming of test speed, high and low deflection setpoints and cycling are performed using the membrane-style keypad. Two LCD displays indicate speed and deflection values. Accuracy +/- 5% full scale. 29.5" travel.
|
- 550 lb capacity (2500 N) |
from $8545.25
FREE Ground Shipping |
 |
Chatillon LTCM-100 Digital Motorized Test Stands
Can be used for tensile, compression, peel and flexural testing when combined with a Chatillon DFE series force gauge. 5" throat and large work area. Crosshead travel in-min or mm-min selectable. 15" crosshead travel. 0.2 to 20 in/min crosshead speed. +/-3% accuracy at full capacity |
- 110 lb capacity (500 N) |
from $2984.43
FREE Ground Shipping
Save when you bundle with a DFE or E-DFE gauge! |
 |
Chatillon LTCM-500 Digital Motorized Test Stand
The Chatillon LTCM-500 test stand may be used for tensile, compression, peel, and flexural testing and is an economical, motorized test stand ideal for production environments, research & development laboratories and quality functions. Large 550 pound capacity, 5" throat, 29 inch crosshead travel
and the speed range is 0.2 to 20 inches/min |
- 550 lb capacity (2500 N) |
Call 1-800-832-0055 for Lowest Prices!
FREE Ground Shipping |
 |
Chatillon TT Pneumatic Test Stand
Pneumatically-operated instrument for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for areas where intrinsic safety is required. Either tensile or compression testing where rapid test speed is required. 6" test stroke, hydro-check valve adjustment for controlling ram speeds as low as 0.1"/min. |
- 500 lb capacity (2.5 kN) |
from $5186.05
FREE Ground Shipping |
|
